IGF US Made Items

  You need a Java enabled browser!

Home

 

IGF's US Made Firearm Items

Click on any of the photos below for a larger image.

 

 

Hk Items

IGF's US Made HK & Cetme Flash Hiders

IGF's US made reproduction flash hider.  Nearly identical to the original with only minor changes made to distinguish it from the imported part.  22mm outer diameter allows for bayonet attachment etc.  Available in a threaded 15x1  (standard Hk threads) version in an Hk and Cetme design, or as a press on Flash hider for PTR 91 barrels. 

Cetme Flash hiders are stamped with "US" and Flash Hiders are engraved "IGF"

Hk and Cetme Flash Hiders are Back in Stock

Description Price
IGF US HK Flash Hider $39.00
Quantity Desired:
IGF US Cetme Flash Hider $39.00 Quantity Desired:
IGF US PTR Press On Flash Hider $49.00 Quantity Desired:

 

IGF's HK Brake

Looks like an Hk birdcage flash hider, but functions as a brake venting gas through the 6 side ports to reduce felt recoil.  Threaded standard Hk 15x1mm RH.  Will work with .308 and .223 Hk rifles and clones. 

New Cetme Version which has the two lightening cuts at the bottom to match the original Cetme Flash Hider

This brake is also available as a press on version for PTR rifles. 

IGF Brakes are Back in Stock

Description Price
IGF US Hk Brake $39.00 Quantity Desired:
IGF US Cetme Brake $39.00 Quantity Desired:
IGF US PTR Press on Brake $49.00 Quantity Desired:

IGF's MP5 Recoil Rod Assembly

Designed to improve the action of 9mm MP5 clones.  Rod is made from micro polished 303 stainless, support rings are made from White Delrin, and finished with an Extra Power Recoil Spring.  This rod will smooth your action, reduce recoil, and improve reliability in MP5 clones and can be used in factory Hk guns for an improved action.

Product Price  
IGF MP5 Recoil Rod Assembly 49.00   Quantity Desired:

 

 

 

IGF 4 Prong Flash Hider

Only slightly longer than a factory Hk bird cage flash hider with much better flash reduction, shown above on an Hk51.  Also looks great on the G3 and G3k.  Us made and machined from heat treated and stress relived 4140 steel for outstanding durability.  Only available threaded 15 x1.  Price is $60 plus shipping.

Product Price  
IGF 4 Prong Flash Hider 60.00 Back Ordered

 

 

 

click the photo for a better picture

IGF 53 Replica Flash Hiders

Our US made replica of the factory 53 flash hider, features the same length and outer diameter as the original.  Machined from heat treated and stress relived 4140 steel for outstanding durability.  Available threaded 15 x1 and 1/2 x 28. Price is $75 plus shipping.

Product Price  
IGF 53 Flash Hider Threaded 15 x 1 75.00 Back Ordered

 

IGF 53 Flash Hider Threaded 1/2 x 28 75.00 Back Ordered

 

IGF 53 Style Flash Hider for G3k rifles

Machined from heat treated and stress relived 4140 steel for outstanding durability.  Threaded 15 x1 and will bring overall barrel length over the 16" min. when permanently attached to G3K and 33K rifles.  Price is $75 plus shipping.

In stock as of Jan 20th, 2009

Product Price  
IGF G3k Flash Hider 75.00   Quantity Desired:

PSG1 Trunnion Extension

This extension is machined to a tight tolerance which gives the longer and heavier PSG or MSG90 barrel more support and better accuracy.  It is also necessary to help support the PSG/MSG forearm.  $75 plus shipping.

In stock as of Jan 20th 2009

Product Price  
PSG1 Trunnion Extension 75.00   Quantity Desired:

MP5 Thread Protector

For protecting the muzzle threads on factory MP5s and can be used on other firearms with threaded muzzles.  Available in both 1/2 x 32 and 1/2 x 28 threads.  $15.00 ea plus shipping.

Product Price  
MP5 Thread Protector 1/2 x 28 15.00   Quantity Desired:
MP5 Thread Protector 1/2 x 32 15.00   Quantity Desired:

 

HK Fake Pushpins for Plastic Lowers

Easily installs in plastic Hk lowers with epoxy to give the look of a pinned on full auto lower.  $10 per set plus shipping.

Product Price  
IGF Hk Lower Fake Pushpins $10.00   Quantity Desired:

AK Items

22mm Adapter for AK-74 rifles

Outside threads are 22 x 1.5 mm which is the thread pattern used on Romanian AK-74 brakes.  There was never a flash hider made in 22mm so post ban rifles do not have to have a perm attached brake with this adapter.  The adapter is available internally threaded with 1/2 x 28 threads or as a 5/32 ID press fit version.  The press fit version will require final boring of the adapter for a press fit on a specific AK muzzle.   Price is $25 plus shipping.  We can also install these on your AK rifle for $55 plus shipping the installed price includes the adapter, detent pin, spring and the labor to install the adapter.

 

Krinkov Fake Suppressors

As shown in the photo above.  These are made from one solid piece of Billet Aluminum.  When permanently attached to a Krinkov barrel they will bring the overall barrel length over the 16" minimum.  The extensions are fairly light and designed so they will not degrade accuracy.  Now available for Yugo Krinkovs also available  threaded 24 x 1.5 for Bulgarian and Russian Krinkovs. 

Product Price
IGF Bulgarian Krinkov Fake Suppressor

Threaded 24 x 1.5 RH

60.00   Quantity Desired:
IGF Yugo M92 Krinkov Fake Suppressor Threaded 26 x 1.5 LH 60.00   Quantity Desired:

Krinkov Fake Coated Black

Same as above with Black Powdercoated Finish

 

Product Price
IGF Black Coated Krinkov Fake Suppressor 75.00   Quantity Desired:

AK-105 4 Prong Flash Hider

These are made for the AK-105 and other AK models that have the integrated front site / gas block.  When permanently attached these bring the overall barrel length to 16 1/4 inches.  Internally threaded 24 x 1.5 mm.  $95 plus shipping

AK / Galil Front Sight Tool

Used to adjust elevation and will work on AK and Galil Front Site Posts.  Made from High Carbon Steel for strength.  Much stronger than Chinese site tools and as strong if not stronger than $30 Bulgarian Front Site Tools.  $15 plus shipping.

Product Price  
IGF AK/Galil Front Sight Tool $15   Back Ordered Check Back Soon we'll update with expected delivery date

Walther P22 Threaded Muzzle Nut w/ Thread Protector

Replaces the factory P22 muzzle nut in seconds with the P22 muzzle nut tool.  External threads are 1/2 x28 and will mount all popular accessories with that thread.  The nut is painted flat black to match the factory Walther slide finish and the included thread protector is parkerized.  Price is $39 plus shipping.

Walter P22 Threaded Muzzle Nut 1/2 x 28 Quantity Desired:

 

Please  use the shopping cart or call us at 870-656-9840  to place an order.

Payment accepted for the above items via Visa, Mastercard, Discover, or American Express, with the shopping cart, over the phone or Money Order/Cashiers Check.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Services Firearms Finishes IGF US Made Items Cart

      

    

Back Home Next
Hit Counter